This manual provides essential information for the safe and proper operation, maintenance, and troubleshooting of your Intex Sand Filter Pump. Please read this manual carefully before using your filter pump.

Introduction

Welcome to the world of Intex swimming pools! This instruction manual provides detailed information on the safe and efficient operation of your Intex Sand Filter Pump, specifically designed to maintain the crystal-clear water quality of your above-ground pool. This manual covers all aspects of your filter pump, including assembly, installation, operation, maintenance, and troubleshooting. We encourage you to read this manual carefully before using your filter pump to ensure your safety and to optimize the performance of your pool system.

Your Intex Sand Filter Pump is a key component in maintaining a clean and healthy swimming environment. It effectively removes debris, dirt, and other contaminants from your pool water, ensuring a refreshing and enjoyable swimming experience. This manual will guide you through every step of the process, from initial setup to regular maintenance, empowering you to keep your pool sparkling clean and ready for fun.

Please keep this manual in a safe and accessible place for future reference. If you have any questions or require further assistance, please contact our customer support team. We are here to help you enjoy the benefits of your Intex pool to the fullest!

Safety Precautions

Your safety and the safety of others is our top priority. Please read and understand the following safety precautions before operating your Intex Sand Filter Pump. Failure to comply with these instructions may result in serious injury or damage to the equipment.

• Electrical Safety⁚ Always disconnect the filter pump from the power source before performing any maintenance, cleaning, or repairs. Never operate the filter pump with a damaged power cord or plug. Ensure the power outlet is properly grounded and protected by a ground fault circuit interrupter (GFCI).
• Water Safety⁚ Never allow children to operate the filter pump or play around the equipment. Keep the filter pump area clear of obstacles and ensure adequate lighting around the pump. Exercise caution when working near water, and avoid operating the filter pump during thunderstorms or when there is standing water around the equipment.
• Mechanical Safety⁚ Always wear appropriate safety gear, such as gloves and safety glasses, when handling the filter pump or its components. Do not attempt to repair the filter pump yourself unless you are qualified to do so. Contact a qualified technician for any repairs or maintenance. Avoid touching any moving parts while the filter pump is in operation.

By following these safety precautions, you can ensure a safe and enjoyable swimming experience for you and your family.

Parts List and Identification

Familiarize yourself with the components of your Intex Sand Filter Pump for proper assembly, operation, and maintenance. This section provides a list and description of the key parts included with your filter pump⁚

• Filter Pump Unit⁚ The main unit housing the motor, pump, and filter tank. It includes a pressure gauge, air relief valve, and multi-port valve for controlling water flow.
• Filter Tank⁚ A cylindrical container filled with sand that filters impurities from pool water. It features a drain plug for emptying and cleaning.
• Sand⁚ Special filter sand specifically designed for pool filtration. It is typically silica sand with specific grain size and purity.
• Pump Basket⁚ A removable basket located within the pump housing that collects larger debris before it reaches the filter tank.
• Hose⁚ Flexible hoses connect the filter pump to the pool return line and skimmer, facilitating water circulation. The hose size and connections may vary depending on your model.
• Power Cord⁚ The electrical cord connects the filter pump to a power outlet. Ensure it is properly grounded and protected by a GFCI.

Refer to the diagrams and illustrations provided in this manual for visual identification of these parts.

Assembly and Installation

Properly assembling and installing your Intex Sand Filter Pump is crucial for its efficient operation and longevity. Follow these steps carefully⁚

4.1. Preparing the Pool

• Ensure your pool is filled to the appropriate level, leaving enough space for the filter pump to operate effectively.
• Clean your pool thoroughly to remove any debris that could clog the filter system.
• Locate a suitable spot for the filter pump, ensuring it is level, stable, and easily accessible for maintenance and operation.
• Ensure adequate electrical power supply with a properly grounded outlet, preferably with a GFCI.

4.2. Assembling the Filter Pump

• Carefully unpack the filter pump unit and all its components. Refer to the parts list and identification section for a detailed overview.
• Connect the hoses to the filter pump and pool return line. Ensure a secure and tight connection to prevent leaks.
• Securely mount the filter pump to the ground or a stand, ensuring its stability.

Continue with the installation instructions provided in the next section.

4.1. Preparing the Pool

Before embarking on the assembly and installation of your Intex Sand Filter Pump, ensuring your pool is properly prepared is paramount. This step is essential for smooth operation and optimal filter performance. Here’s a comprehensive guide⁚

• Water Level⁚ Fill your pool to the recommended level, leaving sufficient space for the filter pump to operate efficiently. A well-filled pool allows the filter pump to circulate water effectively, maximizing its cleaning power.
• Pool Cleaning⁚ Thoroughly clean your pool before installing the filter pump. Remove any debris, leaves, or other contaminants that could clog the filter system. A clean pool ensures the filter pump works efficiently and avoids unnecessary strain on its components.
• Location Selection⁚ Choose a suitable location for your filter pump. It should be level, stable, and easily accessible for maintenance and operation. Ensure adequate space around the pump for airflow and easy access to all parts.
• Electrical Connection⁚ Before installing the filter pump, ensure an adequate electrical power supply with a properly grounded outlet. Ideally, use a GFCI (Ground Fault Circuit Interrupter) outlet for added safety.

Following these steps ensures a well-prepared pool environment for a successful filter pump installation.

4.2. Assembling the Filter Pump

Assembling your Intex Sand Filter Pump is a straightforward process, but it’s essential to follow the instructions carefully to ensure proper functionality and longevity. Here’s a step-by-step guide⁚

1. Identify Components⁚ Carefully unpack the filter pump and identify all parts, including the filter tank, pump housing, pressure gauge, multiport valve, and other accessories. Refer to the parts list in this manual for guidance.
2. Connect the Pump Housing⁚ Securely attach the pump housing to the filter tank, making sure the connection is tight and leak-free. Ensure the pump housing is properly aligned with the filter tank.
3. Install the Multiport Valve⁚ Carefully attach the multiport valve to the filter tank, ensuring a secure and watertight connection. The multiport valve controls the flow of water through the filter system, so proper installation is crucial.
4. Attach the Pressure Gauge⁚ Install the pressure gauge onto the filter tank, making sure it is securely attached. The pressure gauge indicates the pressure within the filter system, providing valuable information for maintenance and troubleshooting.
5. Connect the Return Hose⁚ Connect the return hose to the output port of the filter pump, ensuring a tight and secure connection. This hose directs filtered water back to the pool.

After completing these steps, you have successfully assembled your Intex Sand Filter Pump, ready for the next stage.

4.3. Connecting the Filter Pump

Connecting your Intex Sand Filter Pump to your pool is a crucial step in ensuring proper operation and water circulation. Follow these steps to establish a secure and efficient connection⁚

1. Locate the Pool Inlet⁚ Identify the pool inlet valve, typically located near the waterline of your pool. This valve controls the flow of water from the pool to the filter pump.
2. Connect the Inlet Hose⁚ Attach the inlet hose to the inlet port on the filter pump. Ensure the hose connection is secure and watertight, preventing leaks.
3. Connect the Inlet Hose to the Pool⁚ Attach the other end of the inlet hose to the pool inlet valve. Make sure the connection is tight and secure, preventing water from escaping the hose.
4. Connect the Return Hose⁚ Attach the return hose to the output port of the filter pump, ensuring a tight and secure connection. This hose directs filtered water back to the pool.
5. Connect the Return Hose to the Pool⁚ Attach the other end of the return hose to the return jet(s) in your pool. Ensure a secure connection to direct the filtered water back into the pool.

After completing these steps, your Intex Sand Filter Pump is connected to your pool, ready for the final stages of setup and operation.

4.4. Filling the Filter with Sand

Filling the filter with the correct type and amount of sand is essential for optimal performance and longevity of your Intex Sand Filter Pump. Follow these steps carefully to ensure proper sand filling⁚

1. Choose the Right Sand⁚ Use only #20 silica sand specifically designed for swimming pool filters. Avoid using play sand or other types of sand as they may not have the proper filtration properties.
2. Prepare the Filter⁚ With the filter pump turned off and disconnected from power, carefully remove the top lid of the filter tank.
3. Gradual Filling⁚ Slowly add sand to the filter tank, ensuring it is distributed evenly throughout the tank. Do not overfill the tank as this can restrict water flow and hinder filtration efficiency.
4. Recommended Sand Depth⁚ Fill the tank with sand until it reaches the designated level indicated in your filter pump’s instruction manual.
5. Avoid Compaction⁚ Once the sand is filled to the correct level, do not press or compact the sand.
6. Replace the Lid⁚ Carefully replace the top lid of the filter tank, ensuring it is securely fastened to prevent leaks during operation.

After filling the filter with sand, your Intex Sand Filter Pump is ready for its first start-up and initial operation.

Operating the Filter Pump

Once your Intex Sand Filter Pump is properly assembled, installed, and filled with sand, you can start operating it to keep your pool water clean and clear. Here’s a step-by-step guide⁚

1. Connect to Power⁚ Ensure the filter pump is connected to a properly grounded electrical outlet and that the power switch is turned off.
2. Prime the Filter⁚ Prime the filter pump by filling the filter tank with water. You can achieve this by opening the air relief valve located on the top of the filter tank and pouring water into the valve until it flows out continuously.
3. Turn on the Pump⁚ Once the filter tank is filled with water, turn on the power switch to start the pump. You should hear the pump running and see water circulating through the filter.
4. Monitor Pressure Gauge⁚ Keep an eye on the pressure gauge on the filter pump. The pressure gauge indicates the pressure of the water flowing through the filter. When the pressure gauge reading rises significantly, it indicates that the filter media (sand) needs cleaning.
5. Adjust Flow Rate⁚ You can adjust the flow rate of the filter pump using the valve located on the pump’s outlet. A higher flow rate can be beneficial for faster filtration, but a lower flow rate can be more energy-efficient.

Remember to operate your Intex Sand Filter Pump regularly, as per the recommended schedule for your pool size and usage.

Maintenance and Cleaning

Regular maintenance and cleaning are crucial for ensuring your Intex Sand Filter Pump operates efficiently and effectively. Follow these steps to keep your filter pump in optimal condition⁚

1. Backwash the Filter⁚ Backwashing the filter removes dirt and debris accumulated in the sand. To backwash, turn the multiport valve to the “Backwash” position. Let the water flow for a few minutes, or until the water runs clear. Then, switch the valve back to the “Filter” position.
2. Rinse the Filter⁚ After backwashing, rinse the filter to remove any remaining debris. Turn the multiport valve to the “Rinse” position and let the water flow for a short period. Switch the valve back to the “Filter” position.
3. Clean the Filter Basket⁚ Regularly clean the filter basket located at the pump’s intake. Remove the basket, rinse it with water, and replace it. A clean filter basket ensures proper water flow.
4. Check the Pressure Gauge⁚ Monitor the pressure gauge on the filter pump. If the pressure gauge reading rises significantly, it’s time to backwash the filter.
5. Inspect the Pump⁚ Periodically check the pump for any signs of wear, damage, or leaks. Replace or repair any damaged parts as needed.

By following these maintenance and cleaning steps, you can ensure your Intex Sand Filter Pump provides optimal performance and extends its lifespan.